Features |
| |
• CAD-CAM compatibility. • FANUC Emulated Key Board. • Machine is directly linked to PC, hence loading of program on micro-controller is not required. • Easy maintenance with spare card system by layman. • Table Locking facility with stepper motor brakes. • Powerful stepper Motors for axis control. • Variable speed DC Drives for spindle with DC Motor. • Burn in components test at 150% load. • Rugged Machine with Ground Bed. • Wear resistent Turcite coating is
provided on beds. • Stick slip motion is totally avoided. • Powerful PC software for graphics • High speed integer interpolation system for Circular interpolation. •Display of Actual Feed rate, Spindle speed in execution & simulation mode.
• Automatically detects wrong steps in programming. • Safety Functions with Emergency Stop, Over travel Limits. • Alarm & self Diagnostic Functions are Provided. |
| |
|
|
Specification |
Model |
VLM-T- 100 |
Center Height |
100 mm |
Swing Over Carriage |
60 mm |
Distance Between Center |
200 mm |
Max. Machining Diameter |
50 mm |
Max. Longitudinal Travel |
300 mm |
Spindle Speed (with Back Gear) |
40 to 2000 RPM |
Cross Slide Inclination |
o Degrees |
Standard Cutting Tool Size |
12 x 12 mm |
Spindle Motor |
DC Motor, 1 HP |
Thread Cutting |
Straight |
Automatic Lubrication Points |
Provided |
Input System |
Metric / Inch |
Control Axis |
Simultaneous axis |
Interpolation |
Linear, Circular, Parabolic & Elliptical |
Minimum Increment |
0.005 mm |
Minimum Movement Command X |
0.005 mm |
Minimum Movement Command Z |
0.005 mm |
Repetability |
+ 0.020 mm |
Feed Rate X & Z |
400 mm/min |
Rapid feed rate X & Z |
800 mm/mm |
Programmable Dwell (seconds) |
Programmable |
Tool Offset with Turret |
8 nos. |
Backlash Compensation |
Provided |
Speed Over Ride |
40%- 160% |
Feed Over Ride |
20%- 120% |
Type Of Control System |
PC Based System |
Real Time Tool Path Simulation |
Provided |
General Parameters |
|
Floor Area |
Aprx.1300 mm x 700 mm x 1400 mm |
Weight |
550 kg (approx.) |
|
|
