Features |
| |
• CAD-CAM compatibility. • FANUC Emulated Key Boord. • Machine is directly linked to PC, hence loading of program on micro -controller is not required. • Easy maintenance with spore cord system by layman. • Table Locking facility with stepper motor brakes.
• Powerful stepper Motors for axis control. • Variable speed DC Drives for spindle with DC Motor. • Burn in
components test at 150% load.
• Rugged Machine with Ground Bed. • Wear resistant Turcite material is
provided on beds. • Stick slip motion is totally avoided. • Powerful PC software for graphics • High speed integer interpolation system for Circular interpolation. • Display of Actual Feed rate, Spindle speed in execution & simulation mode. • Automatically detects wrong steps in programming.
• safety functions with emergency stop, Over travel Limits. • Alarm & self Diagnostic Functions are Provided. |
| |
|
|
Specification |
Model |
VMM -T-200 |
Table Size with 'T' Slot |
500 x 200 mm / 10 |
X Axis Traverse |
250 mm |
Y Axis Traverse |
175 mm |
Z Axis Traverse |
200 mm |
Spindle Inside Taper |
ISO 30 |
Spindle Speed |
100 to 2500 RPM |
Spindle Motor |
DC Motor, 1 HP |
Automatic Lubrication Points |
Provided |
Input System |
Metric / inch |
Control Axis |
Simultaneous Axis |
Interpolation |
Linear, Circular, Slot Milling, |
|
Rectangular Circular Pocket Milling |
Minimum Increment |
0.005 mm |
Minimum Movement Command X |
0.005 mm |
Minimum Movement Command Z |
0.005 mm |
Repeatability |
+.0.020 mm |
Feed rate X, Y, Z |
500 mm /min |
Rapid Feed Rate X,Y,Z |
1000 mm / mm |
Programme Dwell (seconds)
|
Programmable |
Tool Offset with ATC |
12 nos.
|
Backlash Compensation |
Provided |
Speed Over Ride |
40%- 160% |
Feed Over Ride |
20% - 120% |
Type Of Control System |
PC Based System |
Real Time Tool Path Simulation |
Provided |
General Parameters |
|
Floor Area |
Aprx.1200mmx1200mmx180mm |
Weight |
950 kg (approx.) |
|
|
