Features |
| |
• CAD-CAM compatibility. • FANUC Emulated Key Board. • Machine is directly linked to PC, hence loading of program on micro-controller is not required. • Easy maintenance with spare card system by layman. • Table Locking facility with stepper motor brakes. • Powerful stepper Motors for axis control. • Variable speed DC Drives for spindle with DC Motor.• Burn in
components test at 150% load. • Rugged Machine with Ground Bed.• Wear resistant Turcite coating is
provided on beds.• Stick slip motion is totally avoided.• Powerful PC software
for graphics• High speed integer
interpolation system for Circular interpolation.• Display of Actual Feed rate, Spindle speed in execution & simulation mode.
• Automatically detects wrong steps in programming. • safety functions with emergency stop, Over travel Limits. • Alarm & self Diagnostic Functions are Provided. |
| |
|
|
Specification |
Model |
VLM-T- 125 |
Center Height |
125 mm |
Swing Over Carriage |
11 0 mm |
Distance Between Center |
400 mm |
Max. Machining Diameter |
100 mm |
Max. Longitudinal Travel |
500 mm |
Spindle Inside Taper |
MT2 |
Spindle Speed (with Back Gear) |
40 to 2000 RPM |
Cross Slide Inclination |
o Degrees |
Standard Cutting Tool Size |
16 x 16 mm |
Spindle Motor |
DC Motor, 2 HP |
Thread Cutting |
Straight / Taper |
Automatic Lubrication Points |
Provided |
Input System |
Metric / Inch |
Control Axis |
Simultaneous axis |
Interpolation |
Linear, Circular, Parabolic & Elliptical |
Minimum Increment |
0.005 mm |
Minimum Movement Command X |
0.005 mm |
Minimum Movement Command Z |
0.005 mm |
Repetability |
+ 0.020 mm |
Feed Rate X & Z |
500 mm/min |
Rapid feed rate Z |
1000 mm/mm |
Programmable Dwell (seconds) |
Programmable |
Tool Offset with Turret |
8 nos. |
Backlash Compensation |
Provided |
Speed Over Ride |
40%- 1 60% |
Feed Over Ride |
20%- 120% |
Type Of Control System |
PC Based System |
Real Time Tool Path Simulation |
Provided |
General Parameters |
|
Floor Area |
Aprx.2000 mm x 900 mm x 1600 mm |
Weight |
800 kg (approx.) |
|
|
